HPR series High Power Single Phase SSR
HOME  
 
 
High dielectric strength over 4KV
High isolation strength over 100M[ /500VDC
With Over-heat protection circuit (120J)
High surge current sustenance over 10 times.
High surge voltage sustenance.
Conformity with EN60947-4-3BEN60950.
 
Picture Model Rated current Surge current 12t for Fuse Input Voltage Output Voltage
HPR-60DA 60A 850A 1800A2S 4~32 VDC 24~380VAC
HPR-80DA 80A 1200A 3200A2S
HPR-100DA 100A 1750A 7200A2S
HPR-60DA-H 60A\ 850A 1800A2S 24~550VAC
HPR-80DA-H 80A 1200A 3200A2S
HPR-100DA-H 100A 1750A 7200A2S
HPR-60DAA 60A 850A 1800A2S 20~265 VDC 24~380VAC
HPR-80DAA 80A 1200A 3200A2S
HPR-100DAA 100A 1750A 7200A2S
HPR-60DAA-H 60A\ 850A 1800A2S 24~550VAC
HPR-80DAA-H 80A 1200A 3200A2S
HPR-100DAA-H 100A 1750A 7200A2S

Picture Current of Load Heat Sink Cooling fan
< 5A Non-required Non-requied
< 25A HS-ESR-60 Non-required
> 25A HS-ESR-60 80x80 mm (AC220V) (High Efficient type)


  • To protect the solid state module against a short-circuit of the load.
    Please apply with a fast-burned fused which value of 12t must be less than half of the specified value.
  • The thermal conductive silicone rubber (K > 4.5) or thermal grease is required.
    when the solid state module is mounted on a heat sink.
 
Copyright  © 2006 WAI CHIAO INDUSTRIAL CO., LTD. All rights reserved.
4F,No. 141-3 HePing W. Rd., Sec. 2,Taipei 10066 ,Taiwan  Phone:886-2-2331-9307 Fax:886-2-2381-4286

http://www.viira1985.com E-mail : sales@viira1985.com